Table of Contents
Advertisement
2 Separate the 8 pin serial interface connector
from the Middle Case ass'y.
3 Unscrew four screws (g M2 × 10).
4 Separate the Middle Case ass'y from the
Upper Case.
6.5.2 Removal of the LCD ass'y
1 Unscrew two screws (h M2 × 8).
2 Release two stoppers then lift the LCD ass'y.
3 Disconnect two cables from the connectors.
4 Separate the LED ass'y from the Middle
Case ass'y.
stoppers
connectors (hidden below)
— 28 —
g M2 × 10
h M2 × 8
Advertisement
Table of Contents
