Noise The typical A-weighted noise level determined according to EN60745: Model Sound pressure Sound power level Uncertainty (K) : level (L ) : (dB(A)) (dB(A)) ) : (dB(A)) DGA411 DGA412 DGA413 DGA414 DGA461 DGA462 12 ENGLISH...
Page 13
Wear ear protection. Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode: surface grinding with normal side grip Model Vibration emission (a Uncertainty (K) : (m/s (m/s DGA411 DGA412 DGA413 DGA414 DGA461 DGA462 DGA463 DGA464...
Page 14
DGA511 DGA512 DGA513 DGA514 Work mode: disc sanding with normal side grip Model Vibration emission (a Uncertainty (K) : (m/s h, DS (m/s DGA411 2.5 m/s or less DGA412 2.5 m/s or less DGA413 2.5 m/s or less DGA414 2.5 m/s...
WARNING: The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Page 16
Hold the power tool by insulated gripping Use special care when working corners, sharp surfaces only, when performing an operation edges etc. Avoid bouncing and snagging the where the cutting tool may contact hidden accessory. Corners, sharp edges or bouncing wiring.
Page 17
Be careful not to damage the spindle, the body, the possible kickback may propel the flange (especially the installing surface) or the spinning wheel and the power tool directly at you. lock nut. Damage to these parts could result in When wheel is binding or when interrupting a wheel breakage.
Page 18
(2) battery, and (3) product causing fires, personal injury and damage. It will also using battery. void the Makita warranty for the Makita tool and Do not disassemble battery cartridge. charger. If operating time has become excessively Tips for maintaining maximum shorter, stop operating immediately.
When storing the wireless unit, keep it in the supplied case or a static-free container. Do not insert any devices other than Makita wireless unit into the slot on the tool. Do not use the tool with the lid of the slot damaged.
Indicating the remaining battery capacity Only for battery cartridges with the indicator ► Fig.2: 1. Indicator lamps 2. Check button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator Battery indicator status Remaining lamps NOTE: Depending on the conditions of use and battery the ambient temperature, the indication may differ...