Basic System Operation - Honeywell DT92E Manual
Wireless room thermostat
Hide thumbs
Also See for DT92E:
- Installation manual (17 pages) ,
- User manual (7 pages) ,
- Quick start manual (2 pages)
Advertisement
Basic System Operation
Pairing and Clearing the Thermostat
How to Clear the memory :
1.
On the Thermostat press and hold the power button for 2 seconds to put the unit into the standby
Press the TOP AND DOWN arrow together till you see "Inst" on the screen
2.
Now press the down arrow once to go to "C0nt"
3.
Press the Up arrow 3 times to get to "Clr" and then press the OFF (power) button.
4.
5.
The memory of the Thermostat is now cleared.
How to pair the Thermostat to the Link Plus :
Open the Link Plus app, Press the Plus Icon to Add a device, Select "LINK HONEYWELL HOME DEVICE"
1.
2.
Give the device a name on the app
3.
On the Thermostat press and hold the power button for 2 seconds to put the unit into the standby
Press the TOP AND DOWN arrow together till you see "Inst" on the screen (Installer mode).
4.
Now press the down arrow once to go to "C0nt"
5.
6.
Now press the OFF (power) button on the Wireless Thermostat
On the Link Plus app, press the "LINK" Button, the device should pair.
7.
Advertisement
