Cisco N540X-6Z18G-SYS-A Manual page 21

Install the Device
2. The settings are the following:
Install the required driver from the following link:
https://www.maxlinear.com/product/interface/uarts/usb-uarts/xr21v1410
Figure 28: Connect Using USBA-A Cable
1
2
• Connect Using Console Port (CONS)
Use the console port (CONS) and the converter cable to connect the router to the computer. Use the
converter cable in the following way:
1. RJ-45 to DB-9 Female Connection - Connect the RJ-45 end of the cable to the router.
2. DB-9 Male to USB - Connect the USB end to the computer.
• Baud rate: 115200
• Data: 8
• Parity: none
• Stop bit:1
Connect to the Console Port
Console Port
USB Type-A console cable
Install the Device
21