Use Your Earpieces; Connect To Your Bluetooth Device; Control Anc (Active Noise Cancelation) - Philips TAT3508 User Manual

4 Use your
earpieces
Connect the earpieces to
your Bluetooth device
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Open the charging box cover.
The blue LED �ashes.
The earpieces will search the last
connected Bluetooth device and
reconnect to it automatically. If
the last connected one is not
available, the earpieces will search
and reconnect to the second last
connected device.
Tip
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manually.
Note
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
8 EN
Control ANC (Active Noise
Cancelation)
Enable ANC
Different ANC modes can be toggled via
double tapping on the left earpiece.
• ANC function is automatically
activated when earpiece is placed in
the ear.
• Touch the MFT twice, it will turn the
ANC function off.
• Touch the MFT twice again, it will
change to awareness mode.
ANC ON
ANC OFF
Task MFT
ANC ON Left
earpiece
Awareness Left
mode earpiece
ANC OFF Left
earpiece
Quick Left
awareness earpiece
Awareness
mode
Operation
Double tap
Double tap
Double tap
Continue
touching
after beep