Cable - AEG ARE i5 MTL Manual

Cable

The cable, to provide power supply to the reader, and connection between control unit and reader, is 5m long.
On the reader side it has a 7-pin Hirschmann socket matching to the plug at the reader.
For the control unit side, the RS232 interface signals are connected to a 9-pin Sub D socket.
Power supply has to be connected to two single strands with cord end terminals.
Pay attention not to get inductive coupled interfering signals via the cables. Do not install it along cables car-
rying signals with high power and frequencies.
Pin assignment:
RxD pin 2
TxD pin 3
GND pin 5
+12/24V
GND
--------------------------------------------------------------------------9/21------------------------------------------------------------------------------------
yellow
green
grey
brown
white
pin 2
pin 3
pin 5
pin 4
pin 5