Case
Material
Protection class
Dimensions
Weight
Working temperature
Storage temperature
Maximal humidity
Electric requirements
Supply voltage
Maximal current
Current consumption in standby mode (antenna off)
Interface
Power supply
Interface – RS 232
Via the serial interface the ARE i5 is communicating with it's control unit (e.g. with a terminal program on
the PC). The configuration parameters must be 19200 Baud transfer rate, 8 data bits, no parity and one stop
bit (8N1). There is no hardware handshake (Xon/Xoff or RTS/CTS) supported.
Cold start
After a cold start the reader is initialized with the parameters saved in the internal nonvolatile memory. Eve-
ry changed parameter is automatically saved. The device starts with the same configuration it was switched
off.
--------------------------------------------------------------------------10/21------------------------------------------------------------------------------------
Pocan
IP 65
365 x 265 x 50mm
approx. 2.0kg
0° C to +70°C
-20°C to +70°C
95% at +50°C (non-condensing)
12V ± 0.3V (Id 1000495, 1000496)
24V ± 0.3V (Id 1002492, 1003745, 1004083)
Check the identification plate
approx. 1.2A for 12V device
approx.. 1A for 24V device
approx. 0.15A
RS 232
Don't use a switched-mode,
but a linear regulated power supply.