Canon DP-V2730 Operation Manual page 49

Sub Menu
2
Center Marker
Enable
Size
Line Width
Line Color
Line Brightness
3
Grid Marker
Enable
Distance
Line Width
Line Color
Line Brightness
[Center Marker] shows the center of the image.
On, Off Switches the center marker On, Off.
Large Sets the size of the center marker.
Middle
Small
Thick Sets the width of the center marker line.
Normal
Thin
White, Red, Green, Sets the color of the center marker line.
Blue, Yellow, Cyan,
Magenta, Gray
High, Low, Half Sets the brightness of the center marker line.
[Grid Marker] is marker used to check the horizontal and vertical position.
When [Distance] [*** dots]
On, Off Switches the grid marker On, Off.
160 dots Sets the horizontal and vertical line distance.
240 dots
320 dots [160/240/320 dots]: Sets the line distance to the selected number of dots.
80% (UHD) [80% (UHD) to 95% (UHD)]: This indicates the percentage of the display
83% (UHD)
85% (UHD)
88% (UHD)
90% (UHD)
93% (UHD)
95% (UHD)
Thick Sets the width of the grid marker line.
Normal
Thin
White, Red, Green, Sets the color of the grid marker line.
Blue, Yellow, Cyan,
Magenta, Gray
High, Low, Half Sets the brightness of the grid marker line.
Setting Options (Factory default)
When [Distance] [***% (UHD)]
area of the 3840x2160 area. The area of the selected ratio is indicated
by the marker.
OSD Menu
49