Canon DP-V2730 Operation Manual page 29

Sub Menu
2 020 Constant
Luminance
2020 Gamut Mapping
H LG System Gamma
Reduce Backlight Flash
Constant Luminance When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Non-constant Sets the color matrix conversion method.
Luminance
[Constant Luminance]: YUV signals are linearly converted and then
[Non-constant Luminance]: YUV signals are converted into RGB signals
• Not settable in the following cases:
-
-
-
-
Gamut Mapping When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Clipping [Gamut Mapping]: Mapping is performed on colors outside the native
[Clipping]: Colors outside the native color gamut are clipped by a general
• This cannot be set when [Channel Settings] [Picture Mode] [Type] [Quad]
or [Dual] is selected.
Automatic When [Gamma/EOTF] [Hybrid Log-Gamma]
Manual Sets the system gamma or peak luminance.
• When Manual is [Automatic]: When [Hybrid Log-Gamma] is selected, it adjusts the system
selected
[Gamma/EOTF] [Manual]: When [Hybrid Log-Gamma] is selected, adjusts the system
When [Hybrid Log-
Gamma]
1.000 to 1.500 (1.200)
On, Off
When [Adjustment] [Backlight Control] is set to an option other than [Off],
the screen may exhibit a flash in cases such as switching between scenes
with a large difference in luminance. You can use [Reduce Backlight Flash]
to reduce this phenomenon.
• When [Channel Settings] [Picture Mode] [Type] [Quad] or [Dual] is
selected, the setting is fixed to the setting of screen A.
Setting Options (Bold: factory default)
converted into RGB signals.
without changing gamma 0.45.
When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]
When the [Format] signal method is set to ICtCp or XYZ
[Channel Settings] [Picture Mode] [Type] [Quad] or [Dual]
When [Channel Settings] [Input Configuration] is set to [HD/SD-SDI], this
item is fixed to [Non-constant Luminance].
color gamut by Canon's unique method.
method.
gamma automatically to match the luminance and HDR range.
gamma. (Increments of 0.005)
The maximum value for each setting becomes the upper limit value of
[HDR Range].
OSD Menu
29