User Parameters; Setting The Date And Time - Panasonic WORKIO DP-150 Operating Instructions Manual

User Parameters

Your facsimile machine has several basic settings (User
Parameters) to help you keep records of the documents you
send or receive. For example, the built-in clock keeps the
current date and time, and your LOGO and ID Number help to
identify you when you send or receive documents.

Setting the Date and Time

At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
Make sure that the FAX Mode indicator is ON. If not, press
1
FUNCTION
2
1
3
SET
4
Enter the new date and time.
Ex:
1 0
1 2
2 0 0 0
1 5 0 0
If you make a mistake, use
over the incorrect number, then overwrite it with a correct
one.
5
RESET
SET
(see Note 1)
(see Note 2)
NOTE
1. The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. So, your clock will
automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April and set the time back
from 2:00 AM to 1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT TIME) to "Invalid" .
(See page 36)
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of 1991. (For details,
see FCC NOTICE at the end of this Operating Instructions)
7
Month : October
Date : 12th
Year : 2000
Time : 3:00 PM
or to move the cursor
INSTALLING YOUR MACHINE
abc..
- +
FAX
SET
to select the "FAX MODE".
FAX
SET MODE
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
1-01-1999 00:00
DATE & TIME
10-12-2000 15:00
1 2 3
4 5 6
7 8 9
0
RESET
FUNCTION
1 7
(1-6)
21