Bilge Drain Plugs; Flushing Connector - Honda ARX1200T3 2004 Owner's Manual

Bilge Drain Plugs

The two bilge drain plugs (1) are used to
drain water from the engine compartment.
This operation should be performed with your
PWC out of the water and the engine off. The
plugs must be secured before returning your
PWC to the water to avoid possible engine
damage.
REAR
(A) (B)
(1) bilge drain plugs
(1)
(A) open
(B) close
Controls & Features

Flushing Connector

The flushing connector (1) is used for
attaching a garden hose to flush the engine
cooling system (page 150).
REAR
(1) flushing connector
Instruments & Controls
(1)
45