Honda ARX1200T3 2004 Owner's Manual page 138

Engine Oil & Filter
7. Apply a thin coat of engine oil to the
rubber seal (6) of a new oil filter.
(6)
(6) oil filter rubber seal
8. Install the new oil filter and tighten it by
hand.
9. Using an oil filter wrench attachment and a
torque wrench, tighten the new oil filter to
the specified torque:
· ·
20 lbf ft (26 N m, 2.7 kgf
130
Servicing Your Honda
·
m)
10. Install the oil drain pipe cap.
Add Engine Oil:
11. Fill the oil tank with the recommended oil
slowly (page 121).
If the oil filter was replaced, use
approximately:
• ARX1200T3
4.5 US qt (4.3R)
• ARX1200N3
4.3 US qt (4.1R)
If the oil filter was not replaced, use
approximately:
• ARX1200T3
4.4 US qt (4.2R)
• ARX1200N3
4.2 US qt (4.0R)