Table of Contents
Advertisement
Nuisance alarms
LED
External Indicator / RIL
Display / LCD
Door open (Door / Key switch)
Site Specific Data (SSD)
Software (S/W) / Firmware / System
program
EBLWin
Web-server / Gateway
EBL Firmware Manager
Multi master system
Note: The TLON configuration must be performed prior creating the Site Specific Data
(SSD).
Router or Repeater is the same type of unit (different
configuration). All network programming (configuration) is
configured using the PC program "TLON Manager". See also
separate TLON Manager Technical Manual.
False or unwanted alarms
LED (Light Emitting Diode) = Yellow, green or red optical indicator
("lamp").
A unit with a red LED connected to a base (ASB / CDB) or a
detector with an output for a remote indicator RIL.
Lit when the built-in LED in the detector / base is lit.
LCD (Liquid Crystal Display) = Display (in the FDCIE or Display
unit) for presentation of fire alarms, fault messages, etc. In
FT1020G3 it is a graphical monochrome LCD (320 x 240 dots)
with backlight.
In FT1020G3 there is a door switch, which is activated when the
FDCIE door is open. Door open feature can be used to disable
fault, strobes or OWS.
An open door is indicated in the LCD (i.e. an "open door" icon).
The SSD is unique for each system. All alarm points, presentation
numbers, user definable alarm texts, programmable outputs, etc.
are created in the PC program EBLWin and also downloaded in
FT1020G3 unit(s) with EBLWin.
The software (S/W) – also called Firmware and System program –
makes the control unit (the microprocessor) work. It is factory
downloaded but another / new version can be downloaded in
FT1020G3 on site using the PC program EBLWin.
PC program used to create and download the SSD in FT1020G3
unit(s). Also used to download another / new software version and
to upgrade the maximum number of alarm points in FT1020G3.
Can be used during commissioning / maintenance of FT1020G3
system (auto address, check loop, acknowledge faults, etc.)
The Web-server / Gateway is used to get FT1020G3 information
as well as remote control via a PC (browser) and an intranet /
internet. The Web-server / Gateway is configured via the PC tool
EBLWin.
PC program, used to download another / new software version.
Each control unit in a network has access to all information.
12
Operation Manual
FT1020G3 Rev 2.10.4
Advertisement
Table of Contents
