Advertisement
Advertisement
Table of Contents
Related Manuals for Xiaomi Mi Electric Scooter 4
Summary of Contents for Xiaomi Mi Electric Scooter 4
- Page 1 Electric Scooter 4 Ultra User Manual...
- Page 2 Read this manual carefully before use, and retain it for future reference. Watch out for Safety Risk Safety Reminder Do not press the accelerator when you are walking Always steer clear of obstacles. alongside the scooter. Do not Try Dangerous Actions Avoid hitting your head on door frames, elevators, and other overhead obstacles.
- Page 3 Do not ride in the rain. Do not ride through puddles Do not use mobile phone or wear earphones when Do not ride on one foot. Do not hang bags or other heavy stuff on the operating the scooter. or any other (water) obstacles. handlebar.
- Page 4 Do not try riding up or down stairs, nor try jumping Do not directly ride through puddles. If there is a Do not touch the mechanical brake. Do not let go of the handlebar while riding. over obstacles. puddle, avoid it at a low speed.
-
Page 5: Product Overview
Product Overview Scooter Bell Buckle Handlebar Stem Brake Lever Headlight Front Reflector Quick Release Lever Quick Release Lever Lock Front Mudguard Front Fork Charging Port Front Rocker Arm (Built-in) Accelerator Mechanical Brake Bell Lever Deck Control Panel & Power Button Hook Rear Mudguard Tail Light &... - Page 6 The recommended tire pressure is 40–45 psi. Note: After performing maintenance, follow the instructions in the app to disable the inflation reminder. Lock: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi Home/Xiaomi Home app.
-
Page 7: Package Contents
Package Contents Extension Nozzle Xiaomi Electric Scooter 4 Ultra Specifications (Connect the pump to the valve for easy pumping) Allen Key Screw × 5 Battery Charger Xiaomi Electric Scooter 4 Ultra User Manual Xiaomi Electric Scooter 4 Ultra Important Information... -
Page 8: Assembly And Setup
Assembly and Set-up Headlight Facing Forward Quick Release Lever Quick Release Lever Lock Follow the number order as illustrated to Install the handlebar onto the stem, and make sure Put down the kickstand, and hold up the stem until it pre-tighten the four screws with the included Allen to install the handlebar in the correct direction. -
Page 9: Charge Your Scooter
Charge Your Scooter The scooter is fully charged when the LED on the battery charger changes from red (charging) to green (fully charged). Connect the battery charger to the charging port. Lift up the rubber flap. Disconnect the battery charger from the charging Put back the rubber flap. - Page 10 Note: The QR code is unique to your scooter, please keep it safe. Before being activated, the scooter will keep beeping when turned on and is limited to 10 km/h. When the scooter is used for the first time, it must be activated via the Mi Home/Xiaomi Home app.
- Page 11 Cancel Notes: · The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. · The version of the app might have been updated, please follow the instructions based on the current app version.
-
Page 12: Restore Factory Settings
Reset Bluetooth How to Ride Before Riding Make sure the scooter is turned on. Press the accelerator and simultaneously press the power button 5 times to reset. When the scooter beeps, it has been reset successfully. Wear a helmet, elbow pads and knee pads before riding. Note: Check the tire pressure before riding. - Page 13 When the scooter starts to coast, put both feet on the deck and gently Decelerating & Braking & Parking press the accelerator. The accelerator can be used once the scooter is going over 5 km/h. V°5km/h Release the accelerator to slow down, and you can enable the energy recovery function to help reduce the speed.
- Page 14 To unlock the scooter, tap "Unlock" in the app. Locking the scooter will consume the scooter's power, please use this function wisely. Note: The phone will vibrate only if the page of the scooter in the Mi Home/Xiaomi Home app is open. Buckle...
- Page 15 Adjust the Mechanical Brake Adjusting Screw Release Hold the stem with either one hand or both hands When unfolding the scooter, pull the buckle upwards to to carry. release it from the hook. Tool: 14 mm T-handle socket wrench (the tool needs to be prepared by the user). Before adjustment, make sure the scooter is powered off and not charging.
- Page 16 Inflate the Tire Valve Cap Remove the tire valve cap, and connect the Remove the extension nozzle, and install the valve Connect the pump to the extension nozzle. Inflate the tire. extension nozzle and the valve securely together. cap. Check the tire pressure every month, and inflate the tires if the pressure is too low. The recommended tire pressure is 40–45 psi.
- Page 17 This QR code is unique to your scooter and can also be found on the labels attached to the control panel and to the right side of the deck. It is used to Made in China connect the scooter with the Mi Home/Xiaomi Home app and contains important information about activating your scooter. Please keep this code Original instructions...