Error Codes - Honeywell HDS18SS User Manual

Problem
Noises
Dishwasher won't fill

6.1 Error Codes

When some malfunctions come on, the appliance will display error codes to warn you:
Codes
E1
E4
E8
E9
If overflow occurs, turn off the main water supply before calling service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
Possible Cause
Detergent cup opening/Drain
pump sound
A hard object has entered the wash
module. When the object is ground
up, the sound should stop
Water valve is turned off
Door latch may not be properly
sealed
Meanings
Longer inlet time
Overflow
Improper orientation of
distributary valve
Keep touching a button more than
30 seconds
This is normal
If the noise persists after a
complete cycle, call for service
Check if the water valve is
turned on
Make sure the door is closed
Possible Causes
Faucets are not opened, or water
intake is restricted, or water
pressure is too low
Some element of dishwasher leaks
Open circuit or break of
distributary valve
Water or something on the button
15
Solution