Table of Contents
Advertisement
4.5 Status Indicators
•
Rinse Deterfent needs to be refilled.
•
Program end.
•
Water failure, faucet is not open.
4.6 Options
HEATING DRY When the "Heating Dry" function is selected, the heater will work
during the drying processs.
The Heating Dry option is not available with "Rinse" cycles.
SANITIZE When the"Sanitize"function is selected, the temperature of water will be
maintained at 69°C(156.2°F) max. The max temperature may not be reached if the
incoming water temperature is not correct. Certified residential dishwashers are not
intended for licensed food establishments.
The Sanitize option is available with "Heavy" " Nomal" and "ECO" cycles.
HI TEMP When the "Hi Temp Wash" function is selected, the temperature of the water
will be maintained at 60°C (140°F) max.
The Hi Temp option is available with "Heavy" "Normal" "ECO" and "Glass" cycles.
ENERGY SAVE When the "Energy Save" function is selcted, energy consumption will
be reduced during washing process.
The Energy Save option is available with "Heavy" and "Normal" cyles.
4.7 Status Window
H:01-H:24 If the Delay Start option is selected, the number of delay start hours
shows in the Status Window.
2:15-0:00 After the machine works, the remaining time of the cycle that have been
selected will be showed in the Status Window.
4.8 Error Indication
In certain situations which are critical to the machines function and safe operation,
the control shall shut down and indicate an error code (See Error Codes on page 18).
If Error codes are displayed, contact the dealer or servicer. They will be able to provide
assistance in trouble shooting the problem and or locate an authorized service
technician if needed.
NOTE The remaining time could suddenly increase or drop several minutes. This
means the Smart Sensor has checked the soil level and determined if additional water
fills are needed or if water fills can be deleted.
8
Hide quick links:
Advertisement
Table of Contents
