Inspecting And Replacing Anode(S) - Yamaha F130A Owner's Manual

5. Put the outboard motor in a vertical posi-
tion. Using a flexible or pressurized filling
device, inject the gear oil into the gear oil
drain screw hole.
Recommended gear oil:
YAMALUBE outboard gear oil or Hyp-
oid gear oil
Recommended gear oil grade:
SAE 90 API GL-4 / SAE 80W API GL-
5 / SAE 90 API GL-5
Gear oil quantity:
F115BET 0.760 L (0.803 US qt,
0.669 Imp.qt)
F115BET1 0.760 L (0.803 US qt,
0.669 Imp.qt)
F130AET 0.760 L (0.803 US qt,
0.669 Imp.qt)
F130AET1 0.760 L (0.803 US qt,
0.669 Imp.qt)
FL115BET 0.715 L (0.756 US qt,
0.629 Imp.qt)
FL115BET1 0.715 L (0.756 US qt,
0.629 Imp.qt)
6. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug to the specified torque.
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
7. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw to the specified torque.
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
EMU29318

Inspecting and replacing anode(s)

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00721
NOTICE
Do not paint anodes, as this would render
them ineffective.
ZMU08122
1. Anode
Maintenance
1
1
ZMU08111
90