Honeywell Hometronic HB 05 Mounting And Operation Instructions page 16

Mounting
Press the Dial button.
►
A rectangle is displayed at the
selected sensor.
The Hometronic Manager is ready for the teach-in mode.
2. Activating the teach-in mode at the sun module
In order to check whether the radio connection is ensured for
later operation, the sun module should remain as near as
possible to the mounting site during the teach-in mode.
Remove the sun module from the
►
mounting bracket.
Open the battery compartment.
►
Press the
►
briefly.
The teach-in mode at the sun
module is activated.
Close the battery compartment and insert the sun module back into
►
the mounting bracket.
The sun module is assigned to the Hometronic Manager.
14
teach-in button (1)
SENSOR-1
SENSOR-2
SENSOR-3
SENSOR-4
BRIGHT
TEMP
.