Mounting External Sensors - Honeywell Hometronic HB 05 Mounting And Operation Instructions

Mounting external sensors

1. Mounting a damp-proof distribution box
Mount the damp-proof distribution box at a suitable location near the
►
sun module before connecting the external sensors. Observe the
corresponding mounting instructions of the manufacturer!
2. Connecting the sun module to the distribution box
Remove the sun module from the
►
mounting bracket and open the
battery compartment.
Insert the plug of the connecting
►
cable into the connecting socket of
the sun module (1).
Open the cable opening (2).
►
Insert the connecting cable.
►
The yellow conductor at the open end of the connecting cable
is not required to connect external sensors.
Mounting
9