Advertisement
Functions
OPERATING MODES
This Breville panel heater has 4 operating
modes: SMART ECO, LOW HEAT (H1),
MEDIUM HEAT (H2) & HIGH HEAT (H3).
The panel heater will default to Eco Mode when
first used, thereafter starting in the last chosen
mode before it was turned off.
When operating, the display screen will show
the current temperature. The
illuminated.
SMART ECO MODE
Smart Eco Mode automatically adjusts the
operating mode based on the room temperature
aligned to both operating efficiency and
comfort. Smart Eco Mode is the default
operating mode when the panel heater is first
used.
• When on Smart Eco mode
• The default temperature setting is 25°C
• unless manually selected.
HEAT MODES
,
,
H1
H2
H3
To manually select a heat setting, press
to choose a heat setting between Low (
display screen), Medium (
screen) and High (
H3
on the display screen).
During operation, the built-in temperature
sensor will turn the heating element on and off
at the chosen heat setting to maintain the set
temperature.
PROGRAMMABLE TEMPERATURE
CONTROL
The temperature on this panel heater can be set
between 5 – 35°C on any operating mode.
• Select the operating mode, then press the
button to set the temperature between 5 –
35°C with 1°C decrement or increment.
• The °C will flash 3 times and then remain
solid on the display screen. The selected
temperature is set.
or
is
will illuminate.
H1
on
on the display
H2
or
NOTE
When using the panel heater for the first time,
the panel heater may emit a smell or give off
smoke. This is normal due to the protective
substances on the heating element. It is
advisable to let the panel heater run for at least
20 minutes on the High heat H3 setting and
then ventilate the room. There is no need for
concern and the smell or smoke will dissipate
with use.
TIMER
The panel heater comes with a
12 hour TIMER that can be set in 1 hour interval.
The panel heater will turn off the heating
operation after the set number of hours have
elapsed and then return to standby. The TIMER
can be set on any operating mode.
• To set the timer, press the
&
button repeatedly until the desired
number of hours is displayed on the LED
display and the
symbol will flash 3 times
and illuminate.
• The panel heater will operate on the selected
mode and automatically turn off once the time
has elapsed.
• The LED display will indicate the operating
mode setting once the timer begins. To check
the pre-set time left on the LED display, press
the
once.
• To cancel the time at any time, press the
or
button until 0 hour is selected on the
LED display screen. The
illuminate.
NOTE
• To run the panel heater continuously, do not
set the timer or set the timer to 0 hour.
• All operating modes can be adjusted at any
time after the timer is set.
• The panel heater will stop operating and
return to standby once the set time has
elapsed.
once, then press
symbol does not
15
Advertisement
