Download Print this page

Assembly - Breville Smart Heat Control Instruction Book

Panel heaters

Advertisement

Assembly

BEFORE FIRST USE
Before using your Breville panel heater for the
first time, remove all packaging material and
promotional labels.
ASSEMBLING YOUR BREVILLE PANEL
HEATER
There are 2 ways your Breville panel heater
can be assembled depending on preference.
The panel heater can be mounted on the wall
using the wall bracket included, or it can be
situated on the floor using the included feet,
with or without the lockable wheels. Ensure
the panel heater is positioned away from
obstructions, furniture and other appliances
before operation.
WALL MOUNT
When selecting a location to wall mount the
panel heater, choose a position that takes
advantage of the maximum volume of air and
the space is suitable for mounting, leaving
enough space around the panel heater. Ensure
your wall is capable of holding the weight of
this panel heater. Use the wall bracket, 4 plastic
anchors and 4 screws provided.
• When selecting a wall mounting location,
make sure the base of the heater is mounted
between 25cm and 35cm from the floor. The
side of the panel heater is placed at least
25cm from the corner of the wall. The top
of the panel heater is at least 60cm from
the ceiling to ensure there is adequate air
ventilation (see Fig. 1).
CAUTION
Before mounting the panel heater to the wall
please ensure that all four attachment points
are secured in either timber or concrete.
Do NOT secure directly into plaster. Please
contact a tradesman if you are unsure. Please
see the Fig. 4 which illustrates the points of
contact. Ensure that the panel heater is at least
25cm from the floor and corners of the wall.
NOTE
Before installing the panel heater, ensure the
following:
• The panel heater is designed for indoor use
only.
• Position the panel heater facing away from
walls, furniture and other appliances.
• Do not fix the panel heater below a power
outlet or power box.
• The power outlet can be easily reached by the
plug and after installation.
• Keep away from curtains and/or other
flammable items.
NOTE
• As a general safety guide, select a suitable
location that is approximately 50cm from any
furniture either side of the unit and 100cm
from any furniture placed in front of the
heater.
• The heater must be mounted horizontally.
• Visually inspect the air inlet and outlet to
ensure no foreign material is blocking the
outlets.
WARNING
Do not mount the panel heater below power
outlets, curtains and/or other flammable items.
WARNING
Do not use this panel heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
11

Advertisement

loading

This manual is also suitable for:

Smart heat control maxLch208Lch308