Functions - Breville AirRounder Connect LPH408 Instruction Book

Functions

OPERATING YOUR PURIFIER
FAN HEATER
Place the purifier fan heater on a flat surface.
Insert the power plug into a 230V or 240V
power outlet and switch on at the outlet. When
switched on, a chime will sound to confirm the
unit is switched on and it is in standby mode.
1. Press the button on the control panel or
remote control to turn the purifier fan heater
on. When switched on for the first time, the
purifier fan heater will start automatically
in heating mode, at high heat level and
25°C as the default set temperature will
illuminate on the LED display.
2. To turn the purifier fan heater off at any
time, press the
panel or remote control. When switched off,
a chime will sound to confirm the unit is
switched off and in standby mode.
3. To adjust how the purifier fan heater
operates, follow the directions below.
NOTE
When the purifier fan heater is on and correctly
setup to the Wi-Fi network, Wi-Fi will attempt
to connect automatically. If a connection
has been made, the Wi-Fi symbol will flash
for 60 seconds, after 60 seconds, the Wi-Fi
symbol will illuminate on the LED display. If a
connection is not made, the Wi-Fi symbol will
stop illuminating. See Wi-Fi Connectivity in
this book for more details.
12
LPH408_ANZ_IB_D21_FA.indd 12 LPH408_ANZ_IB_D21_FA.indd 12
button on the control
ROOM AMBIENT TEMPERATURE
To help maintain a comfortable environment,
your Breville Air Rounder™ Connect purifier
fan heater is fitted with a temperature sensor
that detects the room temperature (in °C)
which will display on the LED display screen.
The number displayed is only an indication of
the room temperature and will vary depending
on the location of the purifier fan heater
in the room.
NOTE
The room temperature display is an indicative
temperature only based on the temperature
sensor within the purifier fan heater.
Temperatures further away from the unit itself
may be different to this reading.
MEMORY
The purifier fan heater has a memory function
and will return to the last setting it was set to
when it was turned off. This will only occur if
the purifier fan heater is not unplugged and/or
switched off at the power point.
FUNCTIONS
Cooling Mode
Your purifier fan heater has 3 cooling fan
settings: LOW, MEDIUM and HIGH.
1. To choose between these cooling fan
settings, press the
the control panel or
remote control, until the desired setting
illuminates on the LED display screen.
The LED display screen will display the
room ambient temperature and current
fan setting.
2. To cancel a cooling setting, press the
button to stop operation. If the operation is
stopped, the unit will enter standby mode
and the LED display screen will be dimmed
and display the ambient room temperature.
button found on
button found on the
29/1/21 11:07 am 29/1/21 11:07 am