Assembly - Breville Smart Tilt Control Instruction Book

Assembly

BEFORE FIRST USE
Before using your Breville ceramic heater for
the first time, remove all packaging material
and promotional labels.
WARNING
To reduce the risk of fire, keep textiles, curtains,
or any other flammable material a minimum
distance of 1m from the air outlet.
ASSEMBLING YOUR BREVILLE
CERAMIC HEATER
1. Place the ceramic heater on a flat surface.
2. Insert the power plug into a 230V or 240V
power outlet and switch the outlet on.
3. Switch on the main power switch located
on the back of the ceramic heater. The LED
display will illuminate to display the current
room temperature. The ceramic heater is
now ready on standby.
4. Touch the button to turn on the
ceramic heater. The ceramic heater will
automatically start on Smart Eco Mode with
a default temperature of 25 degrees Celsius
when first turned on. The ceramic heater
will operate on Smart Eco mode only when
the ambient room temperature falls below
25 degrees.
IMPORTANT
When moving the ceramic heater, always lift
the unit using two hands and set down gently
on a flat and level surface.
5. To return to standby at any time during
operation, touch the
A countdown timer will begin, and 45
seconds will display on the display screen.
Once the display screen displays '0' the
ceramic heater is on standby.
button.
NOTE
The LED display will dim to a comfortable level
after 15 seconds if no buttons on the control
panel are touched. For ease in programming,
the display will return to full illumination when
any operating button on the control panel is
touched.
ROOM AMBIENT TEMPERATURE
Your Breville ceramic heater is fitted with a
temperature sensor that detects the room
temperature, which will be indicated on the
LED display. The number displayed is only an
indication of the room temperature and will
vary depending on the location of the ceramic
heater in the room. The LED display screen will
toggle between the ambient temperature and
the mode selected.
MEMORY
The ceramic heater has a memory function
and will return to the last setting programmed
before it was turned off, except the timer
function. The timer resets to 0 hour setting.
This will only occur if the ceramic heater is not
unplugged and/or switched off at the power
point.
The memory function is available on all modes.
WARNING
Do not use this heater in small rooms when
they are occupied by persons not capable of
leaving the room on their own, unless constant
supervision is provided.
11