Hitachi YUTAKI ATW-YCC-03 Installation And Operation Manual page 16

LCD REMOTE CONTROLLER

• Enable or disable the desired modules (module 1 is enabled
by default)
• Select Next and press OK button.

• Enable or disable the individual DHW for each module.
• Select Next and press OK button.

• Configure thermostat (1 or 2): None, wired or wireless.
• Check RT address if wired is selected.
• Select Wireless binding ID (1 or 2) if wireless is selected.
• Configure Fan coils: Deactivated, cooling, heating or heat &
cool if wired is selected.
• Select Wizard complete and press OK button.
10 PMML0581 rev.1 - 02/2023 - 1000011627

• Select Yes to complete the configuration.
• Press OK button to go to the main screen.