Number Formats - Fujitsu F2MC-16L Series User Manual

3.1.2.

Number Formats

Most commands need parameters which are usually numbers. The monitor uses the following
convention regarding the representation or base:
By default, all numeric inputs are regarded as HEXADECIMAL numbers
•
Characters '0..9' and 'A..F' or 'a..f'.
•
Decimal numbers can be input by prefixing the number
with the two characters "D ' " or with the character "!".
Example
e.g. D ' 100 or !100 equate to 100 dec.
The default input format can be changed to decimal by the command "DECIMAL".
•
Characters '0..9'.
In this case, hexadecimal numbers can be input by the two prefix characters "H ' " or with
the single character "$".
Example
e.g. H ' F00 or $F00 equate to 0F00 hex.
NOTE: Numbers output by the monitor are always in HEX format !
The monitor features the capability of accepting symbol names for parameter inputs. To use
this option, Symbol information must be available (see SYMBOL command group).
© FUJITSU Mikroelektronik GmbH 1996
FUJITSU MB90675-Evaluation Board - User Manual
- 17 -