Chapter 12 Helpful information
Leak current information
These hard wired UPS units can have the following maximum leak current:
UPS Unit
RT8kVA 6U Rack or Tower UPS, single phase
5594-8KX (5594RU8 A543)
RT8kVA 6U 3:1 Phase Rack or Tower UPS
5594-8PX (5594RU8 A546)
RT11kVA 6U Rack or Tower UPS, single phase
5594-9KX (5594RU8 A544)
RT11kVA 6U 3:1 Phase Rack or Tower UPS
5594-9PX (5594RU8 A547)
For the hardwired UPS units, the ground connection is the first connection that
during wiring up the UPS unit to utility power. This will reduce significantly the risk or prevent
electrical shock from indirect contact with utility power. For additional installation instructions
refer to
Chapter 5 Installation
62040, Section 5.1.
For additional information, see the letter from
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Maximum leak current
Up to 5 % of input current, maximal 2 A, see IEC 62040
Up to 5 % of input current, maximal 2 A, see IEC 62040
Up to 5 % of input current, maximal 2.5 A, see IEC 62040
Up to 5 % of input current, maximal 2.5 A, see IEC 62040
. That the maximum leak current is so high is covered by IEC
Eaton
Corporation.
must
be made
225