Chapter 6 Power cables connection
The bypass on the UPS terminal block is to be used when a second utility input is present and
not used with the MBP box, when a second utility connection is not present the jumper is to
remain in place.
For the use of Frequency Converter mode the Bypass terminal needs to be disconnected
otherwise the bypass source will be a different frequency than the primary source:
To accomplish this the jumper is removed from the terminal block of the UPS. The above is the
diagram for use with frequency converter mode, the UPS bypass input is not tied to the normal
AC:
76
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG