Solving Problems With The Image Or Sound - Epson PowerLite 62c User Manual

Solving Problems with the Image or
Sound
No image appears on the screen.
Check that the power light is green, not flashing, and the lens cap
■
is off.
■ The projector may be in standby or sleep mode. If the projector
has not received any input signal for 30 minutes, it turns off the
lamp to conserve the lamp life and save energy. If the power light
is orange, press the P
Press the
■
A/V Mute
turned off temporarily.
If the power was switched off and then on again, wait until the
■
power light stops flashing and remains orange; then press the P
button again.
Power
Check the
■ Video Signal
setting in the Signal menu to make sure it is correct for the
Input
selected source. See page 58 for more information.
Have messages been turned off in the
■
Extended menu? See page 62 for details.
■ Adjust the
Brightness
for the
Brightness Control
page 56 or page 61.
The attached computer may be in sleep mode or displaying a
■
black screen saver. Try pressing a key on the computer.
button to turn the projector on.
Power
button to make sure the picture has not been
or
Computer1 Input
Display
setting on the Image menu or select
setting in the Extended menu. See
or
Computer2
setting of the
High
Solving Problems
85