Playing Sound Through The Projector - Epson PowerLite 62c User Manual

Playing Sound Through the Projector

Your computer probably has its own sound system; however, it may
not be adequate for your presentation. If you need more volume, you
can connect a commercially available computer audio cable to take
advantage of the projector's built-in amplifier and speaker. You can
obtain a computer audio cable (3.5-mm stereo miniplug) from a
computer or electronics dealer.
1. Connect one end of the audio cable to the corresponding
jack on the projector.
2. Connect the other end of the audio cable to your laptop's
headphone jack or
speaker or audio-out port.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
audio-out jack, or your desktop's
Audio
note
If you've connected two
computers to the projector,
you can play sound from
both. Connect the audio
cable for the computer
connected to the
Computer2(Component)
connector to the
corresponding
on the projector. Connect
the other end of the cable to
the second computer.
Setting Up the Projector
jack
Audio
23