Epson Stylus Pro 3880 User Manual page 184

2. Right-click EPSON Stylus Pro XXXX.
3. Select Set As Default Printer, then close the window.
For Windows 2000
1. Click the Start button, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro XXXX in the Printers window.
3. Select Set As Default, then close the Printers window.
For Mac OS X
Make sure that the printer driver Epson Stylus Pro XXXX is correctly added to the Printer Setup
Utility (for Mac OS X 10.3.9 or later), or Printer & Fax (for Mac OS X 10.5 or later) and the correct
one is selected.
Printer port setting does not match the printer connection port (for Windows only)
To select the printer port, follow the steps below.
For Windows XP x64 and XP
1. Click Start, click Control Panel, and then click Printers and Faxes.
2. Right-click EPSON Stylus Pro XXXX, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
For Windows Vista
1. Click , click Control Panel, click Hardware and Sound, and then click Printers.
2. Right-click EPSON Stylus Pro XXXX, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
Epson Stylus Pro 3880 User's Guide
Problem Solver 184