Epson AcuLaser MX20DN series User Manual page 29

f
Setting button
g
Status button
h
Reset button
i On-hook Dialing button
j Redial/Pause button
k Address Book button
l Power Saving button/LED
(Green)
m Stop button
n Start button
o Numeric key pad
p Clear button
q Data light (Green)
r Error light (Orange)
s OK button
t Right button
u Up button
v Down button
w Left button
x Return button
y
Function buttons (F1 to F4)
Epson AcuLaser MX21/MX20 Series
Use this button to switch to the Setup mode.
Use this button to display warnings or the machine status.
Use this button to reset the selected setting item or mistakenly entered values
to the default value. Also, use this button to delete one character from the
entered data when entering a recipient fax number in Fax mode.
Use this button to switch between on-hook and off-hook.
Use this button to redial to the same fax number called previously or to insert a
pause (-) when dialing a number.
Use this button to display the information registered in the address list.
Use this button to enter the power saving mode. This mode is canceled when
the button is pressed again.
When the printer is printing, pressing this button stops the printing.
Use this button to start a copy, scan, or fax transmission.
Used to enter the number of copies or a zoom value in Copy mode. Also, enters
numeric values, such as the Time Setting in Setup Menu.
Use this button to clear the number of copies or delete a character when
entering a text or numbers.
On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
On or flashes when an error has occurred.
Use these buttons to access the control panel menus, where you can make
printer settings and check the status of consumable products. For instructions
on how to use these buttons, see "Using the Control Panel" on page 137.
Use this button to return to a higher hierarchical level while doing settings.
Use this button to move to a menu displayed on the LCD panel.
User's Guide
Getting to Know Your Printer 29