Sending Faxes Using Quick-Dial; Sending Faxes Using Re-Dial - Epson AcuLaser MX20DN series User Manual

Sending faxes using quick-dial

When a frequently used recipient fax number is assigned for the Quick-Dial button (1 to 12), you can
send fax to the recipient by simply pressing the corresponding Quick-Dial button.
Note:
Before using the quick-dial function, you need to register recipient fax information in advance. For
details, see "Registering Recipients" on page 134.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see "Setting Your Originals" on page 47.
2. Press the Quick-Dial button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see "Manual faxing" on
page 124.
4. Press the Start button to start the transmission.

Sending faxes using re-dial

You can send a fax to the last dialed number by simply pressing the Redial/Pause button.
Note:
Once the mode is changed to other than Fax mode, you cannot use the redial function.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see "Setting Your Originals" on page 47.
2. Press the Redial/Pause button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see "Manual faxing" on
page 124.
4. Press the Start button to start the transmission.
Epson AcuLaser MX21/MX20 Series
Faxing (DNF Model Only)
User's Guide
126