Chapter 7 Using The Control Panel; Selecting A Mode - Epson AcuLaser MX20DN series User Manual

Chapter 7
Using the Control Panel

Selecting a Mode

You can use this printer as a printer, copier, fax, and scanner. When the printer is turned on, it enters
the Copy mode (default setting) automatically. When using one of these functions, select your desired
function by pressing the corresponding Mode button on the control panel. Each mode's main screen
appears in the LCD panel as you select the mode.
There are three Mode buttons (for DN model) or four Mode buttons (for DNF model) on the control
panel that allow you to switch between the modes: Copy mode, Scan mode, Print mode, and Fax mode
(DNF model only). In addition, you can also use the Setting button for making various settings for
this printer. For details on the menu, see "Using the Control Panel Menu" on page 138.
DN model
DNF model
Note:
❏ The fax function is available for DNF model only.
❏ You can change the mode to enter when the printer is turned on in the Default Mode setting. For
details, see "Admin Settings" on page 171.
❏ If no button is pressed for more than 3 minutes, any changes made are canceled and the mode returns
to the mode set for the Default Mode setting.
Epson AcuLaser MX21/MX20 Series
Using the Control Panel
User's Guide
137