AEG BPS555060M User Manual page 22

11.3 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
11.4 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Step 1
C1 - Light cleaning
C2 - Normal cleaning
C3 - Thorough cleaning
Step 2
Step 3
Step 4
22 ENGLISH
Before the Pyrolytic Cleaning:
Remove all accessories and remova‐
ble shelf supports.
Pyrolytic Cleaning
Option
- press to select the cleaning programme.
- press to start the cleaning.
After cleaning, turn the knob for the heating functions to the off position.
1
2
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Enter menu: Cleaning
Duration
1 h 30 min
a mild detergent.
.
1 h
3 h