Fan Tray; Hp E3800 Stacking Module - HP E3800-24G-2SFP+ Installation And Getting Started Manual

Introducing the E3800 Switches

HP E3800 Stacking Module

Module Status
LED
1-16

Fan Tray

The E3800 switches have a field-replaceable fan tray. If necessary, the fan can
be replaced while the switch is operating. For more information, see
"Replacing the Fan Tray" on page
HP E3800 Stacking Module
The HP E3800 4-port Stacking Module (J9577A) is a component you can add
to an HP E3800 Switch to provide high-speed stacking connections to other
E3800 switches. See "Stacking Information and Topologies" on page
the E3800 Advanced Traffic Management Guide for more information about
stacking configuration and operation.
Figure 1-13. Front of E3800 4-Port Stacking Module
Extractor Handles
Link LEDs
(one per port)
The HP E3800 4-Port Stacking Module J9577A has the following features:
■ Four stacking connectors for connecting the E3800 switch to other
E3800s in a stacked topology (chain, ring, or mesh). Any of these available
stacking cables can be used for these connections:
• HP E3800 0.5m Stacking Cable (J9578A)
• HP E3800 1m Stacking Cable (J9665A)
• HP E3800 3m Stacking Cable (J9579A)
LEDs, described in
■
4-2.
Stacking Connectors
Table 1-14.
2-23, and
Retaining screw