Black & Decker BDXHTSL1 Installation & Operation Manual page 9

INSTALLING THE THERMOSTAT
INSTALL MOUNTING PLATE (with WALL PLATE if required)
To cover paint or screw holes on the wall behind the thermostat, insert the
Wall Plate between the Mounting Plate and the wall as shown. Both plates
are secured with the same screws.
Use the included screws and wall anchors
(if required) to attach the Mounting Plate
to the wall, making sure the wires go
through the center opening. Note the
correct position indicated by the UP
arrows molded into the plastic.
Note: Use 3/16" drill for wall
anchors if no stud is present.
5