Table of Contents
Advertisement
INSTALLING THE THERMOSTAT
ATTACH WIRING
To insert a wire, loosen the screw corresponding to the labeled
socket and slide the wire into the socket. Once the wire is inserted,
tighten the screw snugly. DO NOT OVERTIGHTEN the screws. Pull
gently on each wire after the screw is snug to make sure it is secure.
Inspect the wires for oxidation and integrity.
NOTICE: A factory supplied jumper is provided between RC and RH.
This should be removed in two transformer systems (See Appendix A).
6
Hide quick links:
Advertisement
Table of Contents
