Table of Contents
Advertisement
MA-2000
The control unit must be installed to the wall so as to allow a clear view of the display
and easy access by the operator. For example, it allows an optimal view of the display at
1,5 m height.
The control unit is designed to be installed to the wall through self-blocking cleats
(masonry walls) or self-tapping screws (prefabricated panels).
It is recommended not to install the panel near heat sources (radiators, etc.)
Use screws of max. 5 mm.
Moreover, if the control unit must be installed to the wall beside a corner wall, the
minimum distance from the latter must be at least 200 mm, so as to avoid the opening
of the front panel.
12
M-167.1-MA2000-EN / 06.2022
Advertisement
Table of Contents
