Sony DVS-9000 User Manual page 116

This enables Spotlighting, and you can now use the knobs to adjust the
parameters.
3
Set the following parameter.
Knob Parameter
1 Total Ambient Brightness of whole image
• Lowering the brightness of the image makes Spotlighting more
effective.
• The Total Ambient setting is shared with the Lighting function.
4
In the <Surface Select> group, select the state of the surface struck by the
light.
Flat: The image surface is unchanged, causing the selected light source to
appear as the effect.
Texture: A texture appears on the surface of the image.
Non Linear: The Spotlighting effect is applied to an area to which a DME
nonlinear effect is applied.
Notes
• The BZS-9471 Texture Lighting Software (for BKDS-9470) or BZDM-
9050 Texture Lighting Software (for MVE-9000) is required to enable
Texture or Non Linear.
An install key must be entered to use the software (see page 283).
• The Spotlighting Non Linear setting is effective for the following
nonlinear effects. For any other nonlinear effect, the result of selecting
the Non Linear setting is the same as selecting Flat.
Wave, Mosaic Glass, Flag, Ripple, Lens, Panarama, Page Turn, Roll.
5
If you selected Texture or Non Linear in step 4, set the following
parameters.
Parameters when you selected Texture
Knob Parameter
1 X
2 Y
3 Size X
4 Size Y
5 Amp
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
Adjustment
Adjustment
Movement in X-axis direction
Movement in Y-axis direction
Image size in X-axis direction
Image size in Y-axis direction
Emphasize bumps and
depressions
Setting values
0.00 to 100.00
Setting values
a)
–8.00 to +8.00
b)
–6.00 to +6.00
0.50 to 16.00
0.50 to 16.00
–100.00 to +100.00
DME Special Effect Operations
c)
115