Setting Up Wpa-Psk Security - NETGEAR WPNT121 User Manual

NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.
1. Run the Wireless USB 2.0 Adapter Smart Wizard.
a. Make sure the software is installed and the Wireless USB 2.0 Adapter is fully inserted in a
USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 3-9
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WPA-PSK [TKIP].
For more information on WPA security, see the Web link to
in Appendix B.
v1.0, February 2006
"Wireless Communications:"
3-13