NETGEAR WPNT121 User Manual page 17

NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual
Follow the instructions below to install the Wireless USB 2.0 Adapter.
1. First, install the software.
a. Insert the NETGEAR CD in your
computer's CD drive. If the CD main
page does not appear, double-click
autorun.exe on the CD.
b. Click the Install Software link and the
Smart Wizard starts.
c. Follow the Wizard steps, and click Next
to continue.
d. When the Installation Complete
message appears, click Next.
2. Now, connect the Wireless USB 2.0
Adapter.
a. Locate an available USB port on your
computer.
b. Insert the end of the cable on the
Wireless USB 2.0 Adapter into the USB
port.
Figure 2-1
Figure 2-2
v1.0, March 2006
2-7