NETGEAR WG311 Installation Manual page 42

Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
Open the configuration utility by clicking on the WG311T icon
a.
system tray.
Figure 3-5: Settings tab page
Click on the Settings tab to display the view shown above.
b.
2. Configure the Security settings.
Select the Use WEP Encryption check box.
a.
Enter the SSID. This is also called the Wireless Network Name.
b.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Networks tab to view a list of the available wireless networks and
their SSIDs at your location.
3. Save your settings in a Profile.
Type a descriptive name for the Profile name.
a.
Click Save Profile. All the configuration settings are saved in this profile.
b.
Click Apply.
c.
Click Close to exit the configuration utility.
d.
3-10
in the Windows
Configuration