NETGEAR WG311 Installation Manual page 22

Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
Configure your WG311T and save the
Profile.
Open the WG311T Smart Wireless
a.
Configuration Utility by clicking on the
icon in the Windows system tray. The
utility opens to the Settings page.
Change the Network Name SSID to
b.
match your network.
Tip: As an alternative to typing in the
SSID, you can use the Network tab to
view the available wireless networks.
Double-click on the desired network.
Click Apply to activate the connection.
c.
Enter a name for your profile and click
d.
Save Profile to store the current settings.
Tip: If you use your notebook PC to
connect to a wireless network at work
and at home, create profiles called work
and home.
Note: This procedure assumes your wireless
network is not using WEP security. If your
wireless network uses WEP, set up your
WG311T accordingly. To view WEP settings
help, click the Advanced button and click the
"Learn about..." link on the Windows XP
Local Area Connection Wireless Networks
Properties tab page.
2-6
Click the system tray icon to open the Smart Wireless
Configuration utility.
WG311T Configuration Utility
Note: The NETGEAR default settings are
Infrastructure mode, with ANY for the wireless
network name SSID, and WEP disabled.
Basic Setup