NETGEAR FA310TX Installation Manual page 4

Install the Network Card
Note: Touch a grounded metal object to free yourself of static
electricity before you handle the network card.
1. Turn the power off and unplug the power cord from your computer.
2. Remove the PC cover.
3. Choose an available PCI slot (PCI slots are the shorter slots) and
remove the corresponding back plate from the PC chassis.
4. Insert the network card into the PCI expansion slot.
Note: To avoid damaging any components on the network card,
handle it by the edges, using your thumbs to push it securely into the
PCI slot. Make sure the network card is fully inserted into the slot to
prevent the PC operating system from freezing at startup.
5. Fasten the network card to the rear of the computer chassis by
tightening the screw that is on the PC.
6. Replace the PC cover and reconnect the power cord to the PC.
Network card
Back plate
removed
Model FA310TX Network Card Installation Guide
7983FB