NETGEAR ANT2409 Brochure & Specs page 2

Power Injector for the 500 mW Booster
An optional accessory for the 500 mW booster, the ANT24BDC power injector provides power through the antenna cable to the
booster. Use this device when the booster is not located near a power outlet. Installed between the access point and the booster, this
device injects up to 12 volts and 2 amps to the booster. The antenna cable from the access point to the injector can be up to 3 m in
length. The cable between the injector and the booster can be up to 10 m long to achieve maximum performance benefits.
Low-loss Antenna Cables
These 1.5 m, 3 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater
distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with
NETGEAR's line of WLAN antennas, and Booster/Power Injector products (range can be drastically reduced if longer or higher loss
cables than these are used.)
1 8 d B i Pa t c h Pa n e l D i r e c t i o n a l A n t e n n a - A N T 2 4 D 1 8
Technical Specifications
Description:
Typical Application:
Maximum Outdoor Range 1 :
Frequency Range:
Gain 2 :
Beam Width:
Dimensions:
Weight:
Package Contents:
Warranty:
1 Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps
under ideal line-of-sight conditions.
2 Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
9 d B i I n d o o r / O u t d o o r O m n i - d i r e c t i o n a l
A n t e n n a - A N T 2 4 0 9
Technical Specifications
Description:
Typical Application:
Frequency Range:
Gain 2 :
Polarization:
Operating Temperature:
Weight:
Package Contents:
Warranty:
18 dBi Patch Panel Directional Antenna with reverse N female
jack and reverse N to reverse SMA adapter
Indoor/outdoor long range point-to-point connections
15.8 km (~9.8 miles)
2.400 ~ 2.485 MHz
18 dBi
Horizontal 60°
Vertical 30°
262.8 x 262.8 x 40 mm (10.35 x 10.35 x 1.58 in)
1520 g/3.35 lbs.
- 18 dBi Patch Panel Directional Antenna - ANT24D18
(cable required, sold separately)
- Wall and ceiling mount brackets and hanging materials
- One reverse N type to reverse SMA adapter
- Installation guide
- Warranty/Support information card
NETGEAR 2-year warranty
9 dBi Omni-directional Antenna with reverse N female connector
Indoor/outdoor medium range point-to-multipoint connections
2400 ~ 2485 MHz
9 dBi
Vertical
-30 to 80º C (-22 to 176º F)
.9 kg/2 lbs.
- Indoor/Outdoor 9 dBi Omni-directional Antenna ANT2409
- Lightning Arrestor
- 2 meter low loss antenna cable (to connect antenna to the lightning arrestor)
- Wall and pole mounting brackets and hanging materials
- One reverse N/SMA Adapter
- Installation guide
- Warranty/Support information card
NETGEAR 2-year warrranty