Page 2
The ANT24BDC enables locating an antenna and a NETGEAR ANT24BNA booster more than 30 feet away from the wireless unit in a remote area where electrical power is not available.
• Support information card If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. NOTE: To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified professional installer service is consulted for site survey and proper installation.
Page 4
One Antenna Port, One Booster and One Antenna Antenna e. g. NETGEAR ANT24O5 Connect cable Connect Antenna cable 500 mW Booster ANT24BNA Connect NETGEAR Antenna Antenna cable cable (short) Two Antenna Ports, One Booster and Two Antennas DC Block Antenna e.
Installing the Booster with the Optional Power Injector Note: As noted in the illustration below, be sure to disconnect the DC power adapter from the ANT24BNA Booster for 802.11b, and connect it to the NETGEAR ANT24BDC Power Injector. Connect Antenna...
NETGEAR 500mW Bi-directional Description Booster for 802.11b, with Two Female Reverse SMA Connectors RF Connector Recommended 0.45 to 0.99 Nm (4.0 to 8.8 in.lb.) Coupling Nut Torque RF Connector Coupling Nut 22.7 kg (50 lb) min. Retention Force RF Connector Contact 2.27 kg (5 lb) min.
Page 7
Specifications ANT24BDC Power Injector for the Description ANT24BNA Booster with Two Female Reverse SMA Connectors Frequency Range 2400 to 2500 MHz PTC Fuse 2.5 A / 30 V Insertion Loss 1.5 dB maximum @ 2.4 to 2.5 GHz Short Circuit Protection PTC Fuse 2.5 A / 30 V...
In the internal function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.