Cisco 8800 Series Quick Start Manual page 2

Make a Call with a Headset
1. Plug in a headset.
2. Enter a number using the keypad.
3. Press Headset .
Make a Call with the Speakerphone
1. Enter a number using the keypad.
2. Press Speakerphone .
Mute Your Audio
1. Press Mute .
2. Press Mute again to turn mute off.
Listen to Your Voice Messages
Press Messages and follow the voice prompts. To
check messages for a specific line, press the line button
first.
Forward All Calls
1. Select a line and press Forward all.
2. Dial the number that you want to forward to, or press
Voicemail.
3. To receive calls again, press Forward off.
Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Cisco IP Phone 8800 Series
Adjust the Volume in a Call
Press Volume
handset, headset, or speakerphone volume when the
phone is in use.
Adjust the Ringtone Volume
Press Volume
ringer volume when the phone is not in use.
Change the Ringtone
1. Press Applications
2. Select Settings > Ringtone.
3. Select a line.
4. Scroll through the list of ringtones and press Play to
hear a sample.
5. Press Set and Apply to save a selection.
Adjust the Screen Brightness
1. Press Applications
2. Select Settings > Brightness.
3. Press the Navigation cluster left to decrease, or right to
increase, the brightness.
4. Press Save.
Change the Font Size
1. Press Applications
2. Select Settings > Font Size.
3. Select a font size.
4. Press Save.
Voice Mail Set-up
Voice mail will be ready to use with an automatic greeting. If
left or right to adjust the you want to change the greeting follow the instructions below.
All staff
with voicemail should change their PIN
1. Press the Voicemail button on your desk phone
2. If this is the first time you have accessed your voicemail,
left or right to adjust the
your PIN will be 12345.
3. Follow the instructions from the Phone System
3. When prompted change your PIN
.
.
.
Quick Start Guide