NETGEAR RangeMax NEXT WNR854T Reference Manual page 59

1. Click Add Service.
Figure 5-2
2. Enter a service name in the Service Name box.
3. In the Service User box, selecting the default value of Any allows the service to be used by
everyone in your network. Otherwise, to restrict the service to a particular PC, select Single
address and enter the PC's IP address.
4. In the Service Type box, select between TCP (the default) and UDP.
5. In the Triggering Port box, enter the outbound port number that the application will use.
6. Set the parameters for the inbound connection—the connection type (TCP or UDP), the
starting port, and ending port numbers.
Note: For the information required for steps 4-6 above, refer to the game or
applications manual or support website.
7. Click Apply to save your changes.
Advanced Configuration of the Router
RangeMax NEXT Wireless Router Model WNR854T Reference Manual
v1.0, 2006-04
5-3