NETGEAR RangeMax NEXT WNR854T Reference Manual page 48

RangeMax NEXT Wireless Router Model WNR854T Reference Manual
Table 4-1. Wireless Router Status Fields
Field
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server (DNS) This field displays the IPaddress(es) of the DNS server(s).
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
4-6
Description
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
If set to FixedIP, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
These parameters apply to the Local (LAN) port of the router.
This field displays the Media Access Control address being used by the
LAN port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.1.1
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
These parameters apply to the Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies the channel of the wireless port being used. See
Communications" in Appendix B
channel.
Indicates the router communication mode: 802.11g and 802.11b, or
802.11g, 802.11b, and 802.11Next (20/40 MHz).
Indicates if the Access Point feature of the Router is enabled. If not
enabled, the Wireless LED on the front panel will be off.
Indicates if the router is broadcasting its SSID.
v1.0, 2006-04
for the frequencies used on each
"Wireless
Maintenance