Unlock And Open Safe; Close And Lock Safe - Honeywell 2510 User Manual

UNLOCK AND OPEN SAFE

This safe is equipped with a dual digital/key lock system that requires
entering an active user code to unlock and an entry key to open. It
allows for two separate reprogrammable active user codes.
The preset factory user codes are "1 2 3 4" and "1 2 3 4 5 6".
1. Begin by inserting the entry key
into the cylindrical key hole on the
left side of the control panel.
2. On the keypad enter the
"#" key, then the user code "1 2 3
4", followed by "#" key again.
3. If correct code is entered, OPEN
will appear on the LCD panel, and
you'll hear a chime tone indicating
the safe is unlocked.
4. Within 5 seconds, turn the key to
the right clockwise and pull the
door open.

CLOSE AND LOCK SAFE

Carefully close the door, turn the key
counterclockwise to the left and remove.
The safe is now locked and an active user
code will need to be re-entered to open.
1.
2.
3.
4.
6